[Public-list] Sheave order
Fred Parker
FParkeriii at ncble.org
Mon Sep 11 12:36:14 PDT 2006
Andrew: I would like a sheave also. I will send you a check today.
Thanks.
Fred Parker, Alert #293.
-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org] On Behalf Of Cole, Andrew L
Sent: Saturday, September 09, 2006 7:44 PM
To: public-list at alberg30.org
Subject: [Public-list] Sheave order
To all who inquired, there is still time to order sheaves, but not a
lot.
If you can pick up the sheave in Annapolis, the cost is $70, if you need
it shipped in the US, it it $70.
Please send a check payable to Zephyr Werkes to me at:
Andrew Cole
410 Second Subject to.
Annapolis, MD 21403
Andrew L. Cole, Esq.
Leitess Leitess Friedberg + Fedder PC
One Corporate Center
10451 Mill Run Circle
Suite 1000
Owings Mills, MD 21117
(410) 581-7400
(410) 581-7410 Fax
(410) 581-7408 Direct
(410) 206-3577 Mobile
-----Original Message-----
From: public-list-request at alberg30.org
[mailto:public-list-request at alberg30.org]
Sent: Saturday, September 09, 2006 12:30 PM Eastern Standard Time
To: public-list at alberg30.org
Subject: Public-list Digest, Vol 774, Issue 1
Send Public-list mailing list submissions to
public-list at alberg30.org
To subscribe or unsubscribe via the World Wide Web, visit
http://alberg30.org/mailman/listinfo/public-list
or, via email, send a message with subject or body 'help' to
public-list-request at alberg30.org
You can reach the person managing the list at
public-list-owner at alberg30.org
When replying, please edit your Subject line so it is more specific than
"Re: Contents of Public-list digest..."
Please do NOT include the entire digest in your reply!
======================================================
Today's Topics:
1. Re: Public-list Digest, Vol 772, Issue 1 (George Dinwiddie)
2. Re: Mast Sheave Order Confirmation (Alberg30)
3. Re: Mast Sheave Order Confirmation (brooks.glenn at comcast.net)
4. Re: Mast Sheave Order (JOHN GRAVES)
5. Re: turnbuckle request (Michael Connolly)
6. Re: Toe Rails Leaking (Michael Connolly)
7. running rigging (George Dinwiddie)
----------------------------------------------------------------------
Message: 1
Date: Fri, 08 Sep 2006 18:16:18 -0400
From: George Dinwiddie <gdinwiddie at alberg30.org>
Subject: Re: [Public-list] Public-list Digest, Vol 772, Issue 1
To: Alberg 30 Public List -- open to all <public-list at alberg30.org>
Message-ID: <4501EBB2.7050106 at alberg30.org>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Cole, Andrew L wrote:
> The Coax actually has a connector on it, the cut wires were all for
> lighting. I like the idea of a terminal block, much cleaner and
> neater than a bunch of connectors taped together and dangling, only
> concern would be corrosion on the wire ends requiring cutting from
> time to time, and eventually requiring replacement of the wire in the
mast.
Use crimp connectors to protect the ends of the wire. And use a drip
loop so any water that does come down the cable drips off before
reaching the bared wire. This also gives you room for some shortening
over time.
--
----------------------------------------------------------------------
When I remember bygone days George Dinwiddie
I think how evening follows morn; gdinwiddie at alberg30.org
So many I loved were not yet dead, http://www.Alberg30.org
So many I love were not yet born.
'The Middle' by Ogden Nash
----------------------------------------------------------------------
------------------------------
Message: 2
Date: Fri, 8 Sep 2006 20:44:04 -0400
From: "Alberg30" <Alberg30 at netzero.net>
Subject: Re: [Public-list] Mast Sheave Order Confirmation
To: "Alberg 30 Public List -- open to all" <public-list at alberg30.org>
Message-ID: <00c601c6d3a9$0e54a580$934e9804 at computer>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
Andrew
Please add my name to the list for one mast sheave.
The check will be in the mail tomorrow.
Bill Hicks 44 Winsom
------------------------------
Message: 3
Date: Sat, 09 Sep 2006 02:53:39 +0000
From: brooks.glenn at comcast.net
Subject: Re: [Public-list] Mast Sheave Order Confirmation
To: Alberg 30 Public List -- open to all <public-list at alberg30.org>
Message-ID:
<090920060253.14317.45022CB3000A3888000037ED220700095302020A0409D29C0501
019D0D at comcast.net>
Hi Andrew,
I suppose I should order one sheave also.
will mail check to your address this weekend.
thaks
Glenn Brooks
Dolce
-------------- Original message ----------------------
From: <mainstay at csolve.net>
> Thanks for the list Andrew -
>
> I do wish to purchase a sheave, but only one please.
>
> Gord Laco #426 Surprise
>
> -----Original Message-----
> From: "Cole, Andrew L" <andrew.cole at llff.com>
> To: <public-list at alberg30.org>
> Date: Fri, 8 Sep 2006 09:36:18 -0400
> Subject: [Public-list] Mast Sheave Order Confirmation
>
> > Test Sheave 1 went in about two weeks ago with success, and Test
Sheave
> > 2 was installed successfully Monday morning, and functioned
perfectly
> > while sailing on Wednesday.
> >
> > Time to place the order.
> >
> > I have (or expect shortly) checks for the following folks, please
check
> > to make sure you are on the list if you want a sheave:
> >
> > Kirk 1 pick up
> > Bergquist 1 pick up
> > Meinhold 1 pick up
> > Grosh 1 pick up
> > Katz 1 ship
> > Stark 1 ship
> > Fleury 1 ship
> > Alley 1 pick up
> > Bounds 1 ship
> > Dinwiddie 1 ship
> > Sutherland 1 ship
> > Ydel 1 ship
> > Irving 1 ship
> > Laco 2 ship
> > Kingsland 1 ship
> > Lehman 2 pick up
> > John Boor 1 ship
> > Brian Curry 1 ship
> >
> > Total 20 to be ordered
> >
> > The install was fairly easy and straightforward, but would be
slightly
> > easier with two people (or if you happen to have a third hand) to
> > handle
> > the two loose cheek plates while juggling the sheave, the
compression
> > tube, the bolt and the uppers, especially if you are doing the
install
> > with the end of the mast hanging over the water. I wasn't able to
get
> > any photos (was too concerned about dropping pieces in the water),
but
> > would be happy to run through the details with anyone who's
interested
> > and emails me.
> >
> > The new sheave is ever so slightly larger in diameter than the
original
> > sheave I removed (approx. .25"). It is possible the original was
worn
> > down quite a bit (it was fairly ratty). Either way, the slight
> > increase
> > in size should be a benefit, if anything, as it will keep the
halyard
> > just a bit further from the extrusion. Please contact me if you
have
> > any questions about this, my install was non-eventful and required
no
> > modification.
> >
> > For anyone else considering placing an order, there is still time.
> > These seem to be much higher quality pieces than the originals
> > (although
> > it's hard to argue with 40 years of flawless service), and I believe
> > they're about equivalent in weight to the Tufnol and lighter than
the
> > aluminum ones I've seen. I'll post photos of the sheave I removed
> > showing the wear. The manufacturer has a website,
www.zephyrwerks.com
> > where he has photos and materials specs.
> >
> > Thanks,
> >
> > Andrew
> >
> > Cole, Andrew L
> > Admitted in Maryland, Virginia & Florida
> > One Corporate Center
> > 10451 Mill Run Circle, Suite 1000
> > Baltimore MD 21117
> >
> >
> > tel: 410 581-7408
> > fax: (410) 581-7410
> > mob: (410) 206-3577
> >
> > --------------------------------------------------------
> > This message contains confidential information and is intended only
for
> > public-list at alberg30.org. If you are not public-list at alberg30.org
you
> > should not disseminate, distribute or copy this e-mail. Please
notify
> > andrew.cole at llff.com immediately by e-mail if you have received this
> > e-mail by mistake and delete this e-mail from your system. E-mail
> > transmission cannot be guaranteed to be secure or error-free as
> > information could be intercepted, corrupted, lost, destroyed, arrive
> > late or incomplete, or contain viruses. Cole, Andrew L therefore
does
> > not accept liability for any errors or omissions in the contents of
> > this message, which arise as a result of e-mail transmission. If
> > verification is required please request a hard-copy version.
> > --------------------------------------------------------
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-list mailing list
> > Public-list at alberg30.org
> > http://alberg30.org/mailman/listinfo/public-list
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list
------------------------------
Message: 4
Date: Sat, 9 Sep 2006 04:43:19 -0400
From: "JOHN GRAVES" <jg1111 at msn.com>
Subject: Re: [Public-list] Mast Sheave Order
To: "Alberg 30 Public List -- open to all" <public-list at alberg30.org>
Message-ID: <BAY104-DAV6E6ECD58C93802EAF0156C8340 at phx.gbl>
Content-Type: text/plain; charset="iso-8859-1"
Andrew,
Is it too late to get in on the group purchase? what is the cost?
John #15
----- Original Message -----
From: Cole, Andrew L<mailto:andrew.cole at llff.com>
To: public-list at alberg30.org<mailto:public-list at alberg30.org>
Sent: Tuesday, August 01, 2006 10:00 AM
Subject: [Public-list] Mast Sheave Order
I have sent emails to everyone who I have heard from, if you did not
receive an email from me and are interested in the group purchase,
please contact me by the end of the day (I will place the order
tomorrow
morning). If you don't receive a reply, please call me at (410)
206-3577. We have 11 takers (Mike Lehman being tentatively two of
them)
so we are well past the highest quantity discount point.
Andrew
Cole, Andrew L
Admitted in Maryland, Virginia & Florida
One Corporate Center
10451 Mill Run Circle, Suite 1000
Baltimore MD 21117
tel: 410 581-7408
fax: (410) 581-7410
mob: (410) 206-3577
--------------------------------------------------------
This message contains confidential information and is intended only
for public-list at alberg30.org<mailto:public-list at alberg30.org>. If you
are not public-list at alberg30.org<mailto:public-list at alberg30.org> you
should not disseminate, distribute or copy this e-mail. Please notify
andrew.cole at llff.com<mailto:andrew.cole at llff.com> immediately by e-mail
if you have received this e-mail by mistake and delete this e-mail from
your system. E-mail transmission cannot be guaranteed to be secure or
error-free as information could be intercepted, corrupted, lost,
destroyed, arrive late or incomplete, or contain viruses. Cole, Andrew L
therefore does not accept liability for any errors or omissions in the
contents of this message, which arise as a result of e-mail
transmission. If verification is required please request a hard-copy
version.
--------------------------------------------------------
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html<http://www.alberg30.org
/store/A30supporters.html>
Please support them.
_______________________________________________
Public-list mailing list
Public-list at alberg30.org<mailto:Public-list at alberg30.org>
http://alberg30.org/mailman/listinfo/public-list<http://alberg30.org/mai
lman/listinfo/public-list>
------------------------------
Message: 5
Date: Sat, 9 Sep 2006 05:32:37 -0700 (PDT)
From: Michael Connolly <crufone at sbcglobal.net>
Subject: Re: [Public-list] turnbuckle request
To: Alberg 30 Public List -- open to all <public-list at alberg30.org>
Message-ID: <20060909123237.36311.qmail at web81102.mail.mud.yahoo.com>
Content-Type: text/plain; charset=iso-8859-1
Glenn,
Contact Gordon Laco in Canada.
Michael
brooks.glenn at comcast.net wrote:
Just recently someone on the list mentioned he could acquire new, new
bronze turnbuckles--maybe from England???.
After this weekend, turns out I should replace 3 pair on the Dolce. Can
anyone send me a contact email or name?
Thanks much,
glenn
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list
------------------------------
Message: 6
Date: Sat, 9 Sep 2006 05:36:46 -0700 (PDT)
From: Michael Connolly <crufone at sbcglobal.net>
Subject: Re: [Public-list] Toe Rails Leaking
To: Jonathan Adams <laughing_gull at verizon.net>, Alberg 30 Public List
-- open to all <public-list at alberg30.org>
Message-ID: <20060909123646.91340.qmail at web81112.mail.mud.yahoo.com>
Content-Type: text/plain; charset=iso-8859-1
Jonathan,
Caulking without removal is never very satisfactory. Removal is a
major job but allows you to inspect/oil the underside of the teak. This
REALLY needs to be done every 15 years or so and ON ONE ever does until
the leaks get so bad they can't tolerate them.
Michael #133
Jonathan Adams <laughing_gull at verizon.net> wrote:
Ernest exposed the fact that my toe rails are leaking miserably. I
have thought that I could caulk down the inside, and replace the
fastenings, and thereby re-seal the toe rail without removing it. is
this reasonable, or do I need to lift the whole thing up and re-caulk?
Jonathan
197
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list
------------------------------
Message: 7
Date: Sat, 09 Sep 2006 12:03:33 -0400
From: George Dinwiddie <gdinwiddie at alberg30.org>
Subject: [Public-list] running rigging
To: Alberg 30 public list <public-list at alberg30.org>
Message-ID: <4502E5D5.6090504 at alberg30.org>
Content-Type: text/plain; charset=us-ascii; format=flowed
I'm replacing some running rigging (the spin halyard I just replaced was
original equipment on the boat). Since questions about sizes and
lengths tend to come up, I started a page at
http://www.alberg30.org/collaborate/RunningRigging to hold the
information. Please add your recommendations to this page, and it can
become a helpful resource when people are headed to the store to buy
line.
- George
--
----------------------------------------------------------------------
When I remember bygone days George Dinwiddie
I think how evening follows morn; gdinwiddie at alberg30.org
So many I loved were not yet dead, http://www.Alberg30.org
So many I love were not yet born.
'The Middle' by Ogden Nash
----------------------------------------------------------------------
------------------------------
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list
End of Public-list Digest, Vol 774, Issue 1
*******************************************
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list
1158003374.0
More information about the Public-List
mailing list