[Public-list] rivet question

[Don Campbell]

Bill;
    I would use stainless but consider isolating every one and the track if you are in salt water and have connected your mast to a grounding system. Otherwise the mast may go to chalk with galvanic
corrosion. If you are in an area that uses salt on winter roads, or know a trucking company that does run on northern roads, check out the aluminum near steel bolts on older aluminum highway trailers.

Don #528

Bill Burke wrote:

> A quick question - What type of rivets, aluminum or stainless, are recommended for attaching (reattaching) a stainless sail track to an aluminum mast?  Seems like the original ones are aluminum...
> Thanks,
> Bill Burke  #116
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list


 1159448872.0