[Public-list] oven installation

[Andrew M Shaw]

Brian,
                I installed a Force10  3 burner stove with an oven on the
starboard side forward of the original galley by adding a short bulkhead
about the height of the range unit on the forward side. I also put in a
new galley counter with a double sink and some drop-in bins (same
footprint as old counter) You do lose sleeping berth space on the settee
which I was not worried about, there is still place for 2 people to sit.
Since it is no longer a sleeping space I also added a locker with shelves
above it at the forward end behind the short fore&aft bulkhead. The
drop-leaf can be re-installed on the new bulkhead or you can even make a
larger one. It does make for a much more workable galley.  It all depends
on what your priorities are.

Andy
#477 Savannah Rose
St. Mary's,  MD

On Tue, 02 Jan 2007 06:56:59 -0800 Brian Hofler <bhofler at shaw.ca> writes:
> I was thinking the starboard side...Rearrange the sink farther 
> aft...I will
> lose about a foot on the length off the setee....
> 
> -----Original Message-----
> From: public-list-bounces at lists.alberg30.org
> [mailto:public-list-bounces at lists.alberg30.org]On Behalf Of C.B. 
> Currier
> Sent: Tuesday, January 02, 2007 3:50 AM
> To: Alberg 30 Public List -- open to all
> Subject: Re: [Public-list] oven installation
> 
> Where the heck will you fit it?
> 
> --
> C.B. Currier
> Infinity #57
> Daybreak #458
> 
> Brian Hofler wrote:
> > Hello once again...I have another question...Has anyone installed 
> an oven
> > in
> > an A30? I have recently acquired an Origo 6000 and plan to install 
> soon.
> > If
> > you have done so I would appreciate any tips and or pictures.
> >
> > Thanks
> >
> > Brian - # 496
> >

> 
> 
> 

 1167784286.0