[Public-list] Through hulls

[Mike Lehman]

I replaced some of my gate valves with Marelon ones many years ago. I 
replaced the others with bronze ball valves, also many years ago. Now I am 
replacing the Marelon valves with bronze ones, because I can no longer close 
or open the Marelon ones. The bronze ones I used many years ago still work 
fine.



Mike Lehman
~~~_/)_/)~~_/)~~~




----Original Message Follows----
From: John Flanders <jflanders at sympatico.ca>
Reply-To: Alberg 30 Public List -- open to all 
<public-list at lists.alberg30.org>
To: Alberg 30 Public List -- open to all <public-list at lists.alberg30.org>
Subject: [Public-list] Through hulls
Date: Sun, 28 Jan 2007 19:30:50 -0500

I want to replace the through hulls and the gate valves on my boat.
I'm draw towards bronze, full-flanged seacocks, however,  I would
like to hear opinions and experiences of the Marelon seacocks.
John
#624

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
public-list mailing list
public-list at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

_________________________________________________________________
Check out all that glitters with the MSN Entertainment Guide to the Academy 
Awards®   http://movies.msn.com/movies/oscars2007/?icid=ncoscartagline2


 1170095545.0