[Public-list] Through hulls

[Mike Lehman]

They're easy and the sawzall and a big hammer are the right tools for the 
job.



Mike Lehman
~~~_/)_/)~~_/)~~~




----Original Message Follows----
From: "Roger L. Kingsland" <r.kingsland at ksba.com>
Reply-To: Alberg 30 Public List -- open to all 
<public-list at lists.alberg30.org>
To: "Alberg 30 Public List -- open to all" <public-list at lists.alberg30.org>
Subject: Re: [Public-list] Through hulls
Date: Tue, 30 Jan 2007 15:47:51 -0500

Thanks Mike and Dan,

I guess I will pull out my trusty sawzall and clip off a few thru hulls.

Roger



----- Original Message -----
From: "Mike Lehman" <sail_505 at hotmail.com>
To: <public-list at lists.alberg30.org>
Sent: Monday, January 29, 2007 4:14 PM
Subject: Re: [Public-list] Through hulls


 > My best advice is to check the ones on *your* boat and buy replacements
 > that
 > are the same size. The boats varied on this. I know what mine are, but
 > that
 > may not help you. I buy mine at Fawcetts in Annapolis
 >
 >
 >
 > Mike Lehman
 > ~~~_/)_/)~~_/)~~~
 >
 >
 >
 >
 > ----Original Message Follows----
 > From: "Roger L. Kingsland" <r.kingsland at ksba.com>
 > Reply-To: Alberg 30 Public List -- open to all
 > <public-list at lists.alberg30.org>
 > To: "Alberg 30 Public List -- open to all"
 > <public-list at lists.alberg30.org>
 > Subject: Re: [Public-list] Through hulls
 > Date: Mon, 29 Jan 2007 14:07:34 -0500
 >
 > Mike, nothing like good field test data.  Does anyone the sizes of the
 > thru
 > hulls and where I might order them?  I did notice the cockpit drain
 > flanges
 > and the thru hulls to which they are connected are different sizes (I
 > think
 > the drains are smaller).  Rather than look for tapered hoses, maybe I can
 > find bigger drains and thru hulls that match.
 >
 > Roger
 >
 > ----- Original Message -----
 > From: "Mike Lehman" <sail_505 at hotmail.com>
 > To: <public-list at lists.alberg30.org>
 > Sent: Monday, January 29, 2007 1:32 PM
 > Subject: Re: [Public-list] Through hulls
 >
 >
 > >I replaced some of my gate valves with Marelon ones many years ago. I
 > > replaced the others with bronze ball valves, also many years ago. Now I
 > am
 > > replacing the Marelon valves with bronze ones, because I can no longer
 > > close
 > > or open the Marelon ones. The bronze ones I used many years ago still
 > work
 > > fine.
 > >
 > >
 > >
 > > Mike Lehman
 > > ~~~_/)_/)~~_/)~~~
 > >
 > >
 > >
 > >
 > > ----Original Message Follows----
 > > From: John Flanders <jflanders at sympatico.ca>
 > > Reply-To: Alberg 30 Public List -- open to all
 > > <public-list at lists.alberg30.org>
 > > To: Alberg 30 Public List -- open to all
 > > <public-list at lists.alberg30.org>
 > > Subject: [Public-list] Through hulls
 > > Date: Sun, 28 Jan 2007 19:30:50 -0500
 > >
 > > I want to replace the through hulls and the gate valves on my boat.
 > > I'm draw towards bronze, full-flanged seacocks, however,  I would
 > > like to hear opinions and experiences of the Marelon seacocks.
 > > John
 > > #624
 > >
 > > _______________________________________________
 > > These businesses support your Association:
 > > http://www.alberg30.org/store/A30supporters.html
 > > Please support them.
 > > _______________________________________________
 > > public-list mailing list
 > > public-list at lists.alberg30.org
 > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
 > >
 > > _________________________________________________________________
 > > Check out all that glitters with the MSN Entertainment Guide to the
 > > Academy
 > > Awards®   http://movies.msn.com/movies/oscars2007/?icid=ncoscartagline2
 > >
 > >
 >
 >
 > 
--------------------------------------------------------------------------------
 >
 >
 > > _______________________________________________
 > > These businesses support your Association:
 > > http://www.alberg30.org/store/A30supporters.html
 > > Please support them.
 > > _______________________________________________
 > > public-list mailing list
 > > public-list at lists.alberg30.org
 > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
 > >
 >
 >
 > _______________________________________________
 > These businesses support your Association:
 > http://www.alberg30.org/store/A30supporters.html
 > Please support them.
 > _______________________________________________
 > public-list mailing list
 > public-list at lists.alberg30.org
 > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
 >
 > _________________________________________________________________
 > Check out all that glitters with the MSN Entertainment Guide to the
 > Academy
 > Awards®   http://movies.msn.com/movies/oscars2007/?icid=ncoscartagline2
 >
 >


--------------------------------------------------------------------------------


 > _______________________________________________
 > These businesses support your Association:
 > http://www.alberg30.org/store/A30supporters.html
 > Please support them.
 > _______________________________________________
 > public-list mailing list
 > public-list at lists.alberg30.org
 > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
 >


_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
public-list mailing list
public-list at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

_________________________________________________________________
Laugh, share and connect with Windows Live Messenger 
http://clk.atdmt.com/MSN/go/msnnkwme0020000001msn/direct/01/?href=http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&source=hmtagline


 1170206624.0