[Public-list] seacocks/ball valves, Marelon specifically

[Mike Lehman]

The problem I have had with Marelon valves is that over time the freeze up 
and you cannot open or close them.



Mike Lehman
~~~_/)_/)~~_/)~~~




----Original Message Follows----
From: Randy Katz <randyk at bertschi.org>
Reply-To: Alberg 30 Public List -- open to all 
<public-list at lists.alberg30.org>
To: public-list at lists.alberg30.org
Subject: Re: [Public-list] seacocks/ball valves, Marelon specifically
Date: Sun, 1 Jul 2007 23:43:41 -0700 (PDT)

Greetings,

Those thinking of through-hull fittings and seacocks at this time may
     be interested in the following links from Forespar, distributors
     of Marelon products.

A general search under Marelon seacocks will yield many dozens of
      opinions regarding advantages of plastic (Marelon) or bronze
      seacocks and through-hull fittings. Personally, I’d stick with
      bronze when possible, but have used Marelon seacocks or ball
      valves in odd places where a very lightweight valve was needed.


Marelon catalog for 2007:


http://www.forespar.com/onlineCatalog/2007/Marelon/marelon_tableOfContents.shtml


Marelon installation instructions:

  
http://www.forespar.com/resources2/techTips/MarelonThruHullSeavalveInstallation.shtml


Sail On,

Randy Katz
#249
Seattle/Bellingham


_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
public-list mailing list
public-list at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

_________________________________________________________________
Hotmail to go? Get your Hotmail, news, sports and much more! 
http://mobile.msn.com


 1183382243.0