[Public-list] seacocks/ball valves, Marelon specifically

[Mike Lehman]

You are right - we are joking - we prefer all bronze too - I have tried 
Marelon and returned several with broken handles.



Mike Lehman
~~~_/)_/)~~_/)~~~




----Original Message Follows----
From: Rachel <penokee at cheqnet.net>
Reply-To: Alberg 30 Public List -- open to all 
<public-list at lists.alberg30.org>
To: Alberg 30 Public List -- open to all <public-list at lists.alberg30.org>
Subject: Re: [Public-list] seacocks/ball valves, Marelon specifically
Date: Tue, 3 Jul 2007 19:13:12 -0400


On Jul 3, 2007, at 1:28 PM, Jay Davenport wrote:

 > Mike,
 >
 >   You must drink LIGHT beer !

I know you're joking, but I just replaced five of my
through-hull/seacocks (filled in two) with all bronze, and, combined
with the fiberglass (pre-formed grp-board) backing blocks, that was one
HEAVY box of parts.  I like bronze, so I don't mind (and as a parts
person saw one too many Forespar Marlelon seacock come back with a
broken handle), but still, you can always use more freeboard for
stores, water, etc.

Rachel

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
public-list mailing list
public-list at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

_________________________________________________________________
Don't get caught with egg on your face. Play Chicktionary!  
http://club.live.com/chicktionary.aspx?icid=chick_hotmailtextlink2


 1183520372.0