[Public-list] Cabin sole finishing

Mike Lehman sail_505 at hotmail.com
Tue Jun 26 12:47:04 PDT 2007


Interlux Brightside



Mike Lehman
~~~_/)_/)~~_/)~~~




----Original Message Follows----
From: "Bill Ydel" <bydel at bellsouth.net>
Reply-To: Alberg 30 Public List -- open to all 
<public-list at lists.alberg30.org>
To: "'Alberg 30 Public List -- open to all'" 
<public-list at lists.alberg30.org>
Subject: Re: [Public-list] Cabin sole finishing
Date: Tue, 26 Jun 2007 15:04:14 -0400

Speaking of finishes, what is the paint recommendation of the group for
doing the boot-stripe?

Bill

-----Original Message-----
From: public-list-bounces at lists.alberg30.org
[mailto:public-list-bounces at lists.alberg30.org] On Behalf Of Jonathan Adams
Sent: Tuesday, June 26, 2007 2:50 PM
To: Alberg 30 Public List -- open to all
Subject: Re: [Public-list] Cabin sole finishing

At the annapolis boat show a couple of years ago, I saw varnish that was
specifically meant for cabin soles, and had a non slip quality, but a good
finish.

I have the name if you want it - just need to dig it up. let me know.

JA
197

----- Original Message ----
From: "Meinhold, Michael J." <MICHAEL.J.MEINHOLD at saic.com>
To: Alberg 30 Public List -- open to all <public-list at lists.alberg30.org>
Sent: Tuesday, June 26, 2007 9:23:11 AM
Subject: Re: [Public-list] Cabin sole finishing

I tested Varathane on the v-berth sole 2 years ago and it is very easy
to use (water-based) looks good and 3 coats has held up well.

I just have to get around to the rest of the sole.

Mike
Rinn  Duin #272

-----Original Message-----
From: public-list-bounces at lists.alberg30.org
[mailto:public-list-bounces at lists.alberg30.org] On Behalf Of John Boor
Sent: Tuesday, June 26, 2007 9:03 AM
To: Alberg 30 Public List -- open to all
Cc: Alberg 30 Public List -- open to all
Subject: Re: [Public-list] Cabin sole finishing

I used 3 coats of varathane good finish and is not slippery when wet.

John Boor
MAHSEER #380

 > Hi group,
 > I've just started refinishing the cabin sole boards, which are teak
 > and holly (I think).  I've finished sanding the first piece, from the
 > V berth area and I'm ready to finish it.  My question is, 'what with"?

 > A friend at the club says the similar cabin sole boards of his 30ft
 > Nonsuch are coated in three coats of Varathane.  I'm thinking Cetol
 > because I use it on the exterior teak.  What have you found to be the
 > most satisfactory?
 > David Parkes
 > "Sapphira"  #417

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
public-list mailing list
public-list at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org




_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
public-list mailing list
public-list at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


__________ NOD32 2355 (20070626) Information __________

This message was checked by NOD32 antivirus system.
http://www.eset.com


_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
public-list mailing list
public-list at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

_________________________________________________________________
Don’t miss your chance to WIN $10,000 and other great prizes from Microsoft 
Office Live http://clk.atdmt.com/MRT/go/aub0540003042mrt/direct/01/


 1182887224.0


More information about the Public-List mailing list