[Public-list] Cabin sole finishing

[Jonathan Adams]

At the annapolis boat show a couple of years ago, I saw varnish that was specifically meant for cabin soles, and had a non slip quality, but a good finish.

I have the name if you want it - just need to dig it up. let me know.

JA
197

----- Original Message ----
From: "Meinhold, Michael J." <MICHAEL.J.MEINHOLD at saic.com>
To: Alberg 30 Public List -- open to all <public-list at lists.alberg30.org>
Sent: Tuesday, June 26, 2007 9:23:11 AM
Subject: Re: [Public-list] Cabin sole finishing

I tested Varathane on the v-berth sole 2 years ago and it is very easy
to use (water-based) looks good and 3 coats has held up well.

I just have to get around to the rest of the sole.

Mike
Rinn  Duin #272

-----Original Message-----
From: public-list-bounces at lists.alberg30.org
[mailto:public-list-bounces at lists.alberg30.org] On Behalf Of John Boor
Sent: Tuesday, June 26, 2007 9:03 AM
To: Alberg 30 Public List -- open to all
Cc: Alberg 30 Public List -- open to all
Subject: Re: [Public-list] Cabin sole finishing

I used 3 coats of varathane good finish and is not slippery when wet.

John Boor
MAHSEER #380

> Hi group,
> I've just started refinishing the cabin sole boards, which are teak 
> and holly (I think).  I've finished sanding the first piece, from the 
> V berth area and I'm ready to finish it.  My question is, 'what with"?

> A friend at the club says the similar cabin sole boards of his 30ft 
> Nonsuch are coated in three coats of Varathane.  I'm thinking Cetol 
> because I use it on the exterior teak.  What have you found to be the 
> most satisfactory?
> David Parkes
> "Sapphira"  #417

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
public-list mailing list
public-list at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org





 1182883772.0