[Public-List] Cushion Costs

[Dave Terrell]

Dan
 
For comparison, I got new foam in the salon, but resued the foam in the v-berth. I also had a new large triangular cushion made for the v-berth. My total was around $1400 - I had an individual rather than a shop do the work. Excellent results.
David, 432, Scholarship II

>>> <richard.hazlegrove at wachovia.com> 10/10/2007 5:12 PM >>>
Dan,  I believe that it all came to about $3,200.00 and included the 
v-berth and the large v-berth insert as well as the settees and settee 
backs. The settee backs were done in 4" foam.  They also angle cut the 
outboard edges of the starboard settee and v-berth cushions to match the 
hull shape. 

If you are not planning to replace the form it would be considerably less 
expensive.  There are big differences in the grades of foam and the good 
stuff is quite dear.   I seem to recall that the foam costs came to around 
$800.

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html 
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org 
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

 1192121956.0