[Public-List] Hull stiffeners

[Stephen s]

Don,
 
As George mentioned it is a very good idea to speak with Yves. He recommended in my case to go up one size on the lower shrouds and Yves also installed a few watertite comparments in his Alberg can't remember where they were located.
 
Stephen
#114 > Date: Sun, 21 Oct 2007 14:46:41 -0700> From: potatosailor at yahoo.com> To: public-list at lists.alberg30.org> Subject: [Public-List] Hull stiffeners> > I am at the point in my project where we are ready to install the main bulkheads.> This would also be a good time to add longitudinal "hat" stiffeners. (they are kind of like a three or four inch tube cut in half, laid flat side down against the hull, and glassed in)> I have never sailed an Alberg 30 so I have no experience with their characteristics, strong points, and weak points. I plan on sailing the vessel across the pacific and in some pretty rough conditions.> Is there anywhere that you feel the vessel would benefit from longitudinal stiffeners?> > Cheers, Don #473> > > > > > > > __________________________________________________> Do You Yahoo!?> Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > _______________________________________________> These businesses support your Association:> http://www.alberg30.org/store/A30supporters.html> Please support them.> _______________________________________________> Public-List mailing list> Public-List at lists.alberg30.org> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
_________________________________________________________________
Help yourself to FREE treats served up daily at the Messenger Café. Stop by today.
http://www.cafemessenger.com/info/info_sweetstuff2.html?ocid=TXT_TAGLM_OctWLtagline
 1193007267.0