[Public-List] Motor removal

David Parkes davidparkes at ns.aliantzinc.ca
Sun Sep 2 10:50:53 PDT 2007


I removed the Atomic 4 from "Sapphira" in order to do a valve overhaul. 
Releasing the coupling between engine and shaft was no problem at all, 
however letting go the holding down bolts was a major undertaking and 
required much cutting and chiselling.  I would not recommend trying to 
remove the engine with the shaft still attached.  Good luck:)
David Parkes
"Sapphira" #417

----- Original Message ----- 
From: "Peter Amos" <peteamos at tiscali.co.uk>
To: "alberg30 list" <public-list at lists.alberg30.org>
Sent: Tuesday, August 28, 2007 11:21 AM
Subject: [Public-List] Motor removal


> I'm planning to do some work on the motor  in November before I go 
> sailing.Is it possible to ease the motor out of the boat with the shaft 
> still attached,minus the propellor of course. My motor is a Universal 
> Westerbeke M3-20B 3 cylinder diesel.
> Any tips on motor removal  based on experience would be welcomed.
> Pete
> Tait Tait #478
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> 



 1188755453.0


More information about the Public-List mailing list