[Public-List] Holding tank on 1968 serial numbers

[Elyse Pastor]

Hello George,
I would also like to find out (like Jeffrey) if those Raritan tanks fit the 
lower series of boats. Mine is 297 and I need to install a tank for this 
season.
Thanks
Bruno & Elyse
HERON - 297

>Peter Milley wrote:
> > George,
> > I  took delivery this week of a 14 gal holding tank (14D20814) to 
>install in
> > Ginseng, Hull # 574, ordered from Raritan Engineering Inc.
> > I read the Raritan holding tank installation article you posted on the
> > Alberg 30 site and was wondering in hind sight if there was anything you
> > would do differently now that you have had it installed for a number of
> > seasons?
>
>No, I've been very happy with the installation.  I would suggest putting
>the board that holds the tank down in a location that doesn't interfere
>with the finger holes of the plywood.
>
>   - George
>
>Message: 5
>Date: Sun, 13 Apr 2008 06:25:41 -0400
>From: Jeffrey <fongemie at gmail.com>
>Subject: [Public-List] Holding Tank on an older boat
>To: "Alberg 30 Public List -- open to all"
>	<public-list at lists.alberg30.org>
>Message-ID:
>	<a954c9770804130325n368ca825x851a804c6a11e94e at mail.gmail.com>
>Content-Type: text/plain; charset=ISO-8859-1
>
>Hey everyone,
>
>Peter's question reminds me I need to install a holding tank this
>spring. Archives see lots of talk about newer boats, not much on older
>boats. Sounds like the Raritan tank won't fit??
>
>Anyone know of a specific tank that fits well in a pre-liner boat?
>
>
>--
>Jeffrey Fongemie hull #116
>
>



 1208142148.0