[Public-List] Derrick's repowering photos

[Randy Katz]

Brilliant photos, Derrick! These will be immensely helpful to many
other people attempting this job. Eager to see the rest once you get
the thing in.

I had the same fiberglass engine beds which eventually started
collapsing some years after a diesel was installed. To me,building new
beds seemed impossible so I paid-- an arm and a leg-- for Cap Sante to
do it in Anacortes. They used some special $$$ hardwood for the beds,
but I admire your method with the bonded pallet parts.

Always good to have a helper-- woof, woof!

Randy Katz
#249
Seattle/Bellingham WA




Message: 3 
Date: Sat, 26 Apr 2008 10:30:40 -0400 (EDT) 
From: Derrick Serrer <cptn_derrick at yahoo.ca> 
Subject: [Public-List] Repowering Mara #127 
To: Alberg 30 Public List -- open to all 
<public-list at lists.alberg30.org> 
Message-ID: <123435.51651.qm at web30504.mail.mud.yahoo.com> 
Content-Type: text/plain; charset=iso-8859-1 

Hello everyone, 

For those who were following along, I finally managed to get the
engine beds installed, the plan is to bring the engine down next
Saturday and install it.
http://picasaweb.google.com/Mara.Alberg.30/PoweringUp 
I'm keeping my fingers crossed... 

Derrick 


 1209313165.0