[Public-List] Mast Beam support

[Bobby]

Hi,
   
  I just ordered and recieved the aluminum plates to epoxy to either side of the beam as described in the website.  http://www.alberg30.org/collaborate/DeckBeamRepair
   
   
  The price has gone up - $400 - OUCH...but they are real purty...
   
  I procured them from: 
    Kirk Wimer
  Senior Estimator
  WACO Products, Inc.
  410-242-1000 X 303
  kwimer at wacoproducts.com

  
Coincidentially, I'll be playing in epoxy land tonight.  The bracing of the beam is not too difficult.  Mine hadn't deflected too much, but the beam was starting to delaminate.  
   
  Write back if you need more details.  
   
  Good luck!!
   
  Bobby 
  Caprice #388
   
  
Jonathan Adams <laughing_gull at verizon.net> wrote:
  Jay and others

Jay - When we were speaking some time ago, you said you had the "templates" - were you talking about the templates for the mast beam support - or for the icebox work you did?

Regardless, I need to put the same mast beam support in place that you have done. Any advice - is there a template that people are using? or do I just get down there and make my own.

It looks like the most complicated part of the job is decompressing the rig and jacking up the beam?? Am I over simplifying things?

Any comments welcome.

JA
197

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


       
---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile.  Try it now.
 1209582678.0