[Public-List] Mast Beam Variation

[Jeffrey Fongemie]

Excellent. I'll seek out Ray Meijer..

J Bergquist, what is your first name, if you don't mind?

-jeff


On Thu, Jul 17, 2008 at 10:20 AM, J Bergquist <jbergqui at gmail.com> wrote:
> I think Ray Meijer has a pair of sister plates that he bought from
> them this year which he then determined he did not need (his beam had
> already been repaired and seems to be holding up fine). You might
> check with him...because he might sell you the ones he already bought.
>
> I repaired my beam last year (a previous owner had done an
> insufficient repair job and my beam was sagging again...see my comment
> about previous owners). I bought my plates from the Washington
> Aluminum Co. and they were about $500 I think. I don't actually
> remember exactly what they cost.
>
> J
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>