[Public-List] Mast Beam Variation

[Jeffrey]

At some point I need to address this issue on #116.

I like the idea of removing the beam, and either re laminating or
laminating up a new one.   I'd much rather look at a nicely varnished
beam, then a painted hunk of aluminum. It looks like quite a project
though, like Whitby put the beam in first and then everything else.
How many have done this? Is it as much work as it looks?

-Jeff


On Sun, Jul 13, 2008 at 2:16 PM, Theodore M. Liszczak
<tedliszczak at metrocast.net> wrote:
> I appreciate your advice. I will send you four pictures. The first two show
> the mast beam (in good condition). The third is the dropping board.  And the
> last is the door hitting the board. If you notice there is a strip of
> fiberglass cloth between the deck and attaching to the board. I like the
> approach you took i.e,  removing the mast beam and board, re laminating the
> beam and reinstalling.
> Ted
> Freedom A-30
> #345
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>



-- 
Jeffrey Fongemie
_________________________________________________
Internet Consulting, Website Design & Development

P.O. Box 485
Freedom, NH 03836
Tel. 603.539.1751
eFax 801.912.1692
http://www.fongemie.com

 1216079145.0