[Public-List] Mast Beam Variation

[marco lavoie]

Hi Jeff,
 
Yes, exacly the same set up, exept for the knees that have been added on yours its a very good idea I was planning to do something like that in the futur.
 
You put cotton fiber into epoxy resin or polyester resin to thickened to the consistancy of peanut butter to use it as putty.  but wet out the repair zone whit resin first to create a good bond between parts.
 
For the bungs they are iding two nuts. there is trough bolts going down from the mast deck plate trough the beam.
 
 
Marco.
 
 
 > Marco,> > What exactly is holding the beam in place?? Did your setup look like this:> http://picasaweb.google.com/fongemie/MastBeam> > There's two bungs in the center pointing up on mine, would you know if> the fasteners under there are through bolts to something (mast plate> on deck)?? Or just screws?> > What did you use the cotton for??> > -Jeff> > 
 1216227544.0