[Public-List] track car slides

[Michael Connolly]

Bill,
   
  I believe that Derilin (R) is polyethylene and the Star board (R) and the Walmart cutting boards are polypropylene. At any rate the Walmart cuttings boards are $10.00 plus or minus and would provide an inexpensive and just as durable solution for your fix.  You might check Bacon's or other marine surplus stores for cut offs of Star Board pieces at less than half the original cost for new.
   
  If you want the original look use teak wood if you would like to never have to address this issue again in your lifetime use the polyboard approach.
   
  Michael

Bill Woodford <williamwoodford at charleswoodford.com> wrote:
  Fellow Albergers,

On US11, I have genoa tracks mounted on the rail and I have what I presume to 
be jib tracks mounted on the deck. I purchased some new blocks and track car 
slides for the jib track and find that the track car slide won’t slide onto 
the jib track because it is mounted directly against the deck with no space 
for the jib car to slide onto the track. 

What is the preferred method for raising the track so that the car will slide 
easily? Thank you in advance for your suggestions.


Woody
US 11
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


 1204734104.0