[Public-List] track car slides

[Jim Davis]

George said "Delrin is a DuPont trade name for an acetyl plastic (http://plastics.dupont.com/myplastics/Mediator?id=30).  King plastics 
is coy about what sort of polymer is used for StarBoard (http://www.kingstarboard.com/products/StarBoard.aspx), but I believe 
it's probably a high density polyethylene.  "

You might want to try and get a piece long enough to cut both spacers out at full length.  Then using the track as a guide drill one hole and bend to the curve, drill the next hole and so forth.  Use the car to keep alignment and put a bolt through each hole as you do it.  This way there are no gaps and potential hang up points.


Jim Davis
S/V Isa Lei
CT35

"If everyone is thinking alike, someone isn't thinking."
George S. Patton



 1204750583.0