[Public-List] Jib Tracks

[Cole, Andrew L]

I'm sure someone would probably end up vacuum bagging a set of pre-preg
carbon spacers, hollow down the center for weight savings.

Just for the record, I did end up putting my 'ornamental' inboard tracks
back down with beautiful teak spacers that I will dutifully replace when
they splinter and wear out with another set of beautiful teak spacers.
I am a glutton for punishment.

Andrew

>Second, andrew makes another good point that if you just buy a modern
track
>extrusion, you don't need a spacer at all. Brilliant! Why didn't we
think of
>that sooner?

>Doggonit Andrew what WOULD we do without you?  

Cole, Andrew L
Admitted in Maryland, Virginia & Florida
One Corporate Center
10451 Mill Run Circle, Suite 1000
Baltimore MD 21117

 
tel: 410 581-7408
fax: (410) 581-7410
mob: (410) 206-3577

--------------------------------------------------------
This message contains confidential information and is intended only for public-list at lists.alberg30.org. If you are not public-list at lists.alberg30.org you should not disseminate, distribute or copy this e-mail. Please notify andrew.cole at llff.com immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Cole, Andrew L therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version.
--------------------------------------------------------

 1204842277.0