[Public-List] Raritan Holding Tanks.

[Lawrence Morris]

So, if I had Raritan modify the existing design to lowwer the top of  
the tank by 1.5" it will fit in the older non liner boats?

Larry

On May 20, 2008, at 10:16 PM, Mike Lehman wrote:

>
> About 1" - look at hull #123 to see how that problem was solved Mike  
> Lehman  ><((((º>`·.¸¸.·´¯`·.¸><((((º>`·.¸¸.·´¯`·.¸><((((º>  > Date:  
> Tue, 20 May 2008 22:08:04 -0400> From: morris.lc at verizon.net> To: public-list at lists.alberg30.org 
> > Subject: [Public-List] Raritan Holding Tanks.> > Anyone know the  
> modifications needed to make the Raritan tank > specified on the A30  
> site fit an older non-liner boat.? I know that > it is to tall to  
> fit in the space below the bunk. But by how much?> > Help!!> > >  
> Regards,> > Larry> _______________________________________________>  
> These businesses support your Association:> http://www.alberg30.org/store/A30supporters.html 
> > Please support them.>  
> _______________________________________________> Public-List mailing  
> list> Public-List at lists.alberg30.org> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _________________________________________________________________
> Give to a good cause with every e-mail. Join the i’m Initiative from  
> Microsoft.
> http://im.live.com/Messenger/IM/Join/Default.aspx?souce=EML_WL_  
> GoodCause
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


 1211336706.0