[Public-List] Smooth Bronze Winches

[Jonathan Adams]

I have heard of people taking them to a machine shop and having them re-grooved. I have not had any experience with it personally.

Jonathan 
197

----- Original Message ----
From: James McRury <jdmcrury at yahoo.co.uk>
To: Alberg 30 Public List -- open to all <public-list at lists.alberg30.org>
Sent: Tuesday, May 27, 2008 11:27:16 AM
Subject: [Public-List] Smooth Bronze Winches


Hi All
I've been having some difficulty with my sheets not grabbing onto the ultra-smooth surfaces of the original bronze winches on #124 --  has anyone had any success or experience in roughening up the surface of the winches?  I was thinking a coarse wire brush on a drill might work. 
Any ideas?
James. 
#124


      __________________________________________________________
Sent from Yahoo! Mail.
A Smarter Email http://uk.docs.yahoo.com/nowyoucan.html
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org




 1211927165.0