[Public-List] Stern Rail for Ladder

[mahseer at kos.net]

Roger

I have installed a stern ladder made my self from 1in stainless.  The
ladder drops about 3.5ft into the water to allow you to get out very
easily.  I have photo's that I can upload if needed.

John Boor
MAHSEER #380


> Thanks Dave,
>
> I contacted them and learned: 6 leg welded, stern rail (open in the middle
> for a ladder) for an A30 is $985 for single horz. rail & $1058 for a
> double
> rail.  Welded single rail pulpit w/ 4 legs  is $745.  20% off if you order
> both which I guess means, if you really want the stern, adding the bow
> only
> costs $383. 4 week delivery time.  I asked about discounts for a group
> purchase and was told 20% off was best they could do.  If anyone is
> interested in a group purchase I can bargain ("No really, how much for 8
> to
> 12 bow or stern rails made in January [has to be better than ice
> fishing]?")
>
>
> Roger
>
> -----Original Message-----
> From: public-list-bounces at lists.alberg30.org
> [mailto:public-list-bounces at lists.alberg30.org] On Behalf Of Dave Terrell
> Sent: Wednesday, May 28, 2008 10:45 AM
> To: public-list at lists.alberg30.org
> Subject: Re: [Public-List] Stern Rail for Ladder
>
> Roger
>
> Tops in Quality in Michigan has the measurements. I suggest you check them
> for accuracy. I looked at a stern ladder for my boat but did not proceed
> because we have tight length limits in our marina. I understand they
> produced much if not all of the pulpits,etc. on our boats.
>
> Good luck. I  would be interested in finding out what you discover.
>
> david, 432
>
>>>> "Roger L. Kingsland" <r.kingsland at ksba.com> 05/28/08 8:58 AM >>>
> Hi all,
>
> Things are progressing so rapidly on the redo of good old #148 that, after
> only 5 years, I can now leave her outside without covering the topsides
> with
> a tarp.  I eventually plan to have a stern ladder and would like to
> investigate installing a "split" pushpit instead of the single piece
> original.  Can anyone please recommend a company that already has the
> measurements for an A30?
>
> Thanks,
>
> Roger
>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>


 1212059491.0