[Public-List] Public-List Digest, Vol 1394, Issue 1

Wcwinslow at aol.com Wcwinslow at aol.com
Sat Nov 1 15:46:32 PDT 2008


The standard way to keep  bolts and screws from leaking into a core is  to 
drill a large hole then the bolt or  screw, fill it with epoxy and then  drill 
the hole in the epoxy.
 
Bill Winslow
 
 
In a message dated 11/1/2008 6:07:01 P.M. Eastern Daylight Time,  
public-list-request at lists.alberg30.org writes:

One of  the things on my list is to remove the mast step plate and  rebed
everything. I've read that the bolts often leak, letting water into  the core
underneath.



**************Plan your next getaway with AOL Travel.  Check out Today's Hot 
5 Travel Deals! 
(http://pr.atwola.com/promoclk/100000075x1212416248x1200771803/aol?redir=http://travel.aol.com/discount-travel?ncid=emlcntustrav00000001)

 1225579592.0


More information about the Public-List mailing list