[Public-List] removing the coamings

Dave Terrell DTERRELL at message.nmc.edu
Sun Nov 2 13:42:13 PST 2008


I am removing the coamings to refinish them. 
 
I started by reading the e-mail traffic on this topic.  I found the e-mails very helpful and  have printed a number of them out. At this point, all the bolts are out. The current problem is: separating the coamings from the fiberglass. I learned from reading the e-mail record that putty knives and acute angle wood wedges can be used to separate the coamings from the fiberglass. I have been using a putty knife and I think I am making progress piercing through the sealer. I will look around for some wedges tomorrow.
 
What I would like to know is if there is a solvent that will attach the black sealant but that would not bother the fiberglass or the teak? While I am willing to use force if  necessary, I would really like to finesse this problem. 
 
For example, could "unbond", the product used to remove 5200, work? I know it does not attack fiberglass, but do not know about its reaction with teak or the black sealant between the coamings and the fiberglass. 
 
David, 432

 1225662133.0


More information about the Public-List mailing list