[Public-List] Looking for a Winch Pawl

[Jeffrey Fongemie]

Michael,

I'd love to get one, if you are willing. I can't imagine machining one
with a dremel though.  That must take forever? At this point there's
no other choice.

I don't have the pin or the spring, but figured they would be easier
to find. And I'm not in a rush at all. By boat is here at the house,
I'm still working in it..hoping to splash next spring.

If you are indeed willing, I would appreciate it, and would be happy
to pay you for the effort & materials.

-Jeff


On Mon, Oct 13, 2008 at 6:07 PM,  <dickdurk at atlanticbb.net> wrote:
> I need to make a few- I have made them before, hand machining as they say
> with a file and a dremel drill, I can make an extra one if you like.
>
> My mast is pulled, boat out of water. I'm lookinig at it as a winter
> project. do you need it...now? Do you have the spring and the pin that holds
> it to the base?
>
> MichaelGrosh
> #220
>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>



-- 
Jeffrey Fongemie
_________________________________________________
Internet Consulting, Website Design & Development

P.O. Box 485
Freedom, NH 03836
Tel. 603.539.1751
eFax 801.912.1692
http://www.fongemie.com

 1223936650.0