[Public-List] Mast step pad removal - Alberg 30

[Bob Crinion]

Have you had any luck with this?

Have you tried an impact driver to carefully remove the screws?

-bob
A30 #560



-----Original Message-----
From: public-list-bounces at lists.alberg30.org
[mailto:public-list-bounces at lists.alberg30.org] On Behalf Of Peter Milley
Sent: October 19, 2008 11:04 PM
To: Alberg 30 Public List -- open to all
Subject: [Public-List] Mast step pad removal - Alberg 30

Before I tackle the job of removing the mast step pad does anyone have any
advice or suggestions? I have saturated the 6 screws with liberal
applications of penetrating oil over the past few days and will try to
remove them with an impact driver.
I am I correct in assuming the 6 screws are bedded below the aluminium deck
plate in into the fibreglass?
Peter
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


 1224618812.0