[Public-List] Whitby Shop Made Through Hulls

moiraeiii at aol.com moiraeiii at aol.com
Mon Apr 13 10:54:44 PDT 2009


George,
Thanks for the pics and the info that ALL 1/2" thru hulls are made this way. Back to the bronze thru hull store. Guess that explains why there are no 1/2" sea cocks.
Randy





-----Original Message-----
From: George Dinwiddie <gdinwiddie at alberg30.org>
To: Alberg 30 Public List -- open to all <public-list at lists.alberg30.org>
Sent: Mon, 13 Apr 2009 10:16 am
Subject: Re: [Public-List] Whitby Shop Made Through Hulls


crufone at comcast.net wrote:?
> How easy is it to distunguish these through hulls from the normal?
> cast bronze variety??
?
Look at http://alberg30.org/maintenance/Plumbing/WhitbyThroughHull.html ?I've just posted photos there.?
?
> My boat is a 1966 model. Which through hulls?
> are likely to be suspect??
?
It's all the half-inch ones.?
?
> Even though none of them are leaking, I?
> was thinking of removing the through hulls and just rebedding them.?
> Mine is a fresh water boat so I expected this to be a good way to?
> proceed. My original gate valves all work fine, don't leak and none?
> are frozen with corrosion. After rebedding the through hulls I was?
> planning on inspecting and perhaps repacking the gate valve stems and?
> refitting them back in place.?
?
I would replace the gate valves, too. They're brass, not bronze. When I went to replace mine, one crumbled due to internal corrosion that I couldn't see.?
?
?- George?
?
-- ?----------------------------------------------------------------------?
? When I remember bygone days George Dinwiddie?
? I think how evening follows morn; gdinwiddie at alberg30.org?
? So many I loved were not yet dead, http://www.Alberg30.org?
? So many I love were not yet born. also see:?
? 'The Middle' by Ogden Nash http://idiacomputing.com?
?----------------------------------------------------------------------?
?
?
_______________________________________________?
These businesses support your Association:?
http://www.alberg30.org/store/A30supporters.html?
Please support them.?
_______________________________________________?
Public-List mailing list?
Public-List at lists.alberg30.org?
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org?


 1239645284.0


More information about the Public-List mailing list