[Public-List] Seacocks and gate valves.

John Flanders johnflanders at rogers.com
Wed Apr 15 13:51:28 PDT 2009


Mike,
At the risk of sounding stupid, how do you cut the flange off from the  
outside without damaging the  hull? An what tool and method do you  
recommend?
John
On 13-Apr-09, at 9:03 AM, Mike Lehman wrote:

>
> John,
>
>
>
> I have been through this so many times - I don't mess with this  
> anymore - I just cut the flange off the thru-hill fitting from the  
> outside and bang it through the hull with a hammer and just replace  
> the whole damn thing (including the backing blocks) - in the end it  
> is a lot faster and you have an all new fitting.
>
> Mike Lehman
>
>
>> <((((º>`·.¸¸.·´¯`·.¸><((((º>`·.¸¸.·´¯`·.¸><((((º>
>
>
>
>
>
>
>
>
>
>> From: johnflanders at rogers.com
>> To: public-list at lists.alberg30.org
>> Date: Sun, 12 Apr 2009 08:02:27 -0400
>> Subject: [Public-List] Seacocks and gate valves.
>>
>>>
>> I am finally getting around to replacing the original gate-valves on
>> my boat Sam. The 1 and 1/4 inch sink drain valve is frozen solid on
>> the through hull fitting. Has anyone any suggestions on how to get
>> this gate-valve off without doing too much damage. I have a similar
>> problem with the i/2 inch engine water intake, which I propose to
>> replace with a 3/4 seacock.
>> John Flanders
>> Sam 624
>>
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
> _________________________________________________________________
> Rediscover Hotmail®: Get quick friend updates right in your inbox.
> http://windowslive.com/RediscoverHotmail?ocid=TXT_TAGLM_WL_HM_Rediscover_Updates1_042009
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


 1239828688.0


More information about the Public-List mailing list