[Public-List] Seacocks and gate valves.

[John Flanders]

Thanks J.
You heard right. John K, Joan, Lesley and I are planning to cruise the  
Thousand Islands this year. From what I can see from the postings, you  
have a heavy racing schedule ahead of you. Will you be coming to  
Canada this year?
John
On 12-Apr-09, at 8:10 AM, J Bergquist wrote:

> John-
>
> There was a really good article in Professional Boat Builder magazine
> a few issues back about replacing through-hulls.
>
> http://www.proboat-digital.com/proboat/20080809/
>
> Not sure if it will help you, but I thought it was worth reading.
>
> Heard you are going cruising this summer. Enjoy!
>
> J
>
> On Sun, Apr 12, 2009 at 8:02 AM, John Flanders <johnflanders at rogers.com 
> > wrote:
>>>
>> I am finally getting around to replacing the original gate-valves  
>> on my boat
>> Sam. The 1 and 1/4 inch sink drain valve is frozen solid on the  
>> through hull
>> fitting. Has anyone any suggestions on how to get this gate-valve off
>> without doing too much damage. I have a similar problem with the i/ 
>> 2 inch
>> engine water intake, which I propose to replace with a 3/4 seacock.
>> John Flanders
>> Sam 624
>>
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


 1239541978.0