[Public-List] Stay Sizes

[Roger L. Kingsland]

Hi all,

Does anyone know offhand the stock stay sizes?

Roger Kingsland, Managing Partner
Kingsland Scott Bauer Associates

 

KSBA 
________________________________

Architects/Planners/InteriorDesigners/ProjectManagers
 
3441 Butler Street
Pittsburgh, PA 15201
N 40° 27.8344'  W79° 57.9831'
 
412-252-1500 ext.101 
412-779-5101 cell 
412-252-1510 fax
r.kingsland at ksba.com
www.ksba.com

-----Original Message-----
From: public-list-bounces at lists.alberg30.org
[mailto:public-list-bounces at lists.alberg30.org] On Behalf Of Gordon Laco
Sent: Tuesday, April 14, 2009 9:03 AM
To: Alberg 30 Public List -- open to all
Subject: Re: [Public-List] Copper Bottom Paint Removal

I found the hard way that you cannot round the corners...

I developed a technique where I used the boat's compound curves to ensure
that the corners didn't (well hardly ever) dug in.

At the turn of the bilge where the hull goes down into the keel you will
have to scrape up and down instead of fore and aft to keep the corners from
gouging.

It is not as hard to do as it sounds.

Gord #426 Surprise


On 4/14/09 8:52 AM, "Rachel" <penokee at cheqnet.net> wrote:

> Mike,
> 
> Good question.  I'm not sure because the last time I had to use one I 
> didn't know about the corners trick.  I've heard enough people 
> recommend it that it must be doable, but I'm not sure the best way.
> 
> I got lucky with #221 and she came to me with a really clean bottom 
> that had been taken back to gelcoat not too many seasons before.  I 
> bet THAT won't happen with the next boat.
> 
> Rachel
> 
> On Apr 13, 2009, at 10:06 AM, Mike Lehman wrote:
> 
>> 
>> Rachel,
>> 
>> 
>> 
>> Thanks for the tip on the Bahco scraper - I just ordered one from 
>> Amazoin with a spare blade. Question: If this is a carbide blade 
>> scraper, how hard is it to round the corners?
>> 
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


 1239721003.0