[Public-List] Mast Heads for Rachel and Albergs

[crufone at comcast.net]

Stephen, 



What was the cost each for the last order? When I look at the photos on the A lberg 30 site I see that an offset to port extension has been welded on with a stainless bail attached to that with four screws.  Is that what is supposed to be used for the spinnaker halyard?  If so why is it offset to port side?  There were four other tapped holes centered in the foreward top of the mast head, what was the intended use for those? How deep does the collar extend down into the mast extrusion? Looks like about an inch, I wonder if longer might help strengthen our old original masts at this juncture? 



Michael 
----- Original Message ----- 
From: "Stephen Sousa" <alberg114 at hotmail.com> 
To: public-list at lists.alberg30.org 
Sent: Sunday, February 8, 2009 3:56:02 PM GMT -05:00 US/Canada Eastern 
Subject: Re: [Public-List] Mast Heads for Rachel and Albergs 


Hi Tim, 
  
We do not have a cost at this time, the qty will drive the cost. It does contain new sheeves and so on. I would suggest dropping the mast since you have to run halyards up through the Mast Head and connect back/fore stays. 
  
Stephen 
  
  
  
  > Date: Sun, 8 Feb 2009 11:25:04 -0500> From: TAdelman at hospitallaw.com> To: public-list at lists.alberg30.org> Subject: Re: [Public-List] Mast Heads for Rachel and Albergs> > What is the cost for the mast head? Does it include the new sheave? Do> you have to drop the mast to install it. Sorry if these questions have> been answered but I was on a deleting frenzy on the email and deleted> some I probably should have read. > > Thanks, Tim > > -----Original Message-----> From: public-list-bounces at lists.alberg30.org> [mailto:public-list-bounces at lists.alberg30.org] On Behalf Of Rachel> Sent: Sunday, February 08, 2009 3:17 AM> To: Alberg 30 Public List -- open to all> Subject: Re: [Public-List] Mast Heads for Rachel and Albergs> > Stephen,> > Sounds like some great traveling for January :)> > I have kindly been sent one of the original mastheads from a fellow > Alberger who replaced it with one of the new ones from an earlier group > purchase. It looks like it's in really good condition, although if I > find any issues with it upon installation, I will be interested in one > of the new ones. I'll be removing the old one fairly soon, so I should > know in time to get in on the order, if I do need one.> > Thanks so much for organizing this,> > Rachel> #221> On Feb 6, 2009, at 8:21 AM, Stephen Sousa wrote:> > >> > Rachel and fellow Alberg owners,> >> > I have been traveling and just returned to shore in Florida. The mast > > heads for the Alberg are available, in order to capture a nice price > > the greater quantity is the best method.> >> > _______________________________________________> These businesses support your Association:> http://www.alberg30.org/store/A30supporters.html> Please support them.> _______________________________________________> Public-List mailing list> Public-List at lists.alberg30.org> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org> _______________________________________________> These businesses support your Association:> http://www.alberg30.org/store/A30supporters.html> Please support them.> _______________________________________________> Public-List mailing list> Public-List at lists.alberg30.org> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
_________________________________________________________________ 
Windows Live™: Keep your life in sync. 
http://windowslive.com/explore?ocid=TXT_TAGLM_WL_t1_allup_explore_022009 
_______________________________________________ 
These businesses support your Association: 
http://www.alberg30.org/store/A30supporters.html 
Please support them. 
_______________________________________________ 
Public-List mailing list 
Public-List at lists.alberg30.org 
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 

 1234195509.0