[Public-List] Shore Power, revisited

[George Dinwiddie]

David Swanson wrote:
> - Switch to a 30-amp inlet.  OK, any suggestions on how to expand the 
> currrent inlet's 2-1/4" hole in the front wall of the cockpit to 2.8" 
> that Marinco says is needed for their 30-amp inlet? Even if I had a hole 
> saw that big, it would be a bear to drill it since there is no material 
> for the center bit to go through.  I can borrow a jig saw but 2.8" is a 
> pretty tight radius.

One technique I've used is to screw a scrap of wood across the hole on 
the back side.  This scrap doesn't have to completely cover the hole, 
and can be screwed to the part you're cutting out.

  - George

-- 
  ----------------------------------------------------------------------
   When I remember bygone days                         George Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org
   So many I loved were not yet dead,           http://www.Alberg30.org
   So many I love were not yet born.
                'The Middle' by Ogden Nash
  ----------------------------------------------------------------------




 1234268638.0