[Public-List] Cockpit drain through hull size

[moiraeiii at aol.com]

George et al,
If the engine is the Atomic 4 the thru hull may interfere with the exhaust pipe on the port side.
Randy 


-----Original Message-----
From: George Dinwiddie <gdinwiddie at alberg30.org>
To: Alberg 30 Public List -- open to all <public-list at lists.alberg30.org>
Sent: Wed, Jul 1, 2009 11:14 am
Subject: Re: [Public-List] Cockpit drain through hull size


Michael Taylor wrote:?
> Hi Alberg Listers,?
> > I am in the process of fitting new through hulls and seacocks. I?
> have ordered 1 1/2" through hulls for the cockpit drains however?
> looking closely at the curve of the hull in that area I am not sure?
> the thru-hulls will seat properly. Has anyone successfully fitted?
> this size thru-hull.?
?
I think we've got 1-1/4" through hulls, but if you bed them liberally with 5200, they should be fine.?
?
?- George?
?
-- ?----------------------------------------------------------------------?
? When I remember bygone days George Dinwiddie?
? I think how evening follows morn; gdinwiddie at alberg30.org?
? So many I loved were not yet dead, http://www.Alberg30.org?
? So many I love were not yet born. also see:?
? 'The Middle' by Ogden Nash http://idiacomputing.com?
?----------------------------------------------------------------------?
?
?
_______________________________________________?
These businesses support your Association:?
http://www.alberg30.org/store/A30supporters.html?
Please support them.?
_______________________________________________?
Public-List mailing list?
Public-List at lists.alberg30.org?
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org?


 1246552965.0