[Public-List] Wire reel winch - information needed

George Dinwiddie gdinwiddie at alberg30.org
Tue Jun 30 10:43:02 PDT 2009


David Tessier wrote:
> I recall that Hiscock, in one of his books, describes raising the
> mainsail manually, cleating off the halyard and then tightening the
> luff by pulling down on a sliding gooseneck, e.g., with a small
> tackle. I no longer have this option as I have just installed a fixed
> gooseneck using a custom mast fitting (through bolted with 1/4"
> machine screws to nylok nuts welded to two backing plates!) made for
> me by Garhauer. Compromises, compromises.

David, I turned my sliding gooseneck into a fixed one.  I use a 
cunningham to tighten the luff as needed.

  - George

-- 
  ----------------------------------------------------------------------
   When I remember bygone days                         George Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org
   So many I loved were not yet dead,           http://www.Alberg30.org
   So many I love were not yet born.                          also see:
                'The Middle' by Ogden Nash     http://idiacomputing.com
  ----------------------------------------------------------------------




 1246383782.0


More information about the Public-List mailing list