[Public-List] sealing thru hulls

[jimcherry at sympatico.ca]

Michael.....could you tell me something about your "teardrop zinc". I was looking for some info a couple of weeks ago about zincs on the A30. 

Is this the zinc that attaches to the threads on the back of the prop ??  Where did you buy it ??...or did you have to buy something else and adapt it..??

 

Jim C   Topaz #639
 
> Date: Tue, 2 Jun 2009 07:41:42 -0400
> From: dickdurk at atlanticbb.net
> To: public-list at lists.alberg30.org
> Subject: Re: [Public-List] sealing thru hulls
> 
> 
> > Roger 148
> > Should I also coat the threads w/ some lock tight?
> 
> I put everything back together with never seize. My problem has always 
> been taking stuff apart (down the road) without destroying it. It works 
> especially well with exhaust parts, but I even put the stuff on the 
> inside of hoses before installing on the barb fittings.
> I have split bronze and brass fittings using teflon tape, it makes it 
> easy to overtighten. I would think with plastic that is a real 
> possibility. Be careful.
> Nev-R-Seize is conductive according to the packaging, btw. A previous 
> post mentions using it as insulation preventing electroylsis. That won't 
> work for that purpose, me thinks. I coat the threads of my teardrop zinc 
> with it and it corrodes just fine.
> 
> MichaelGrosh
> #220
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

 1243951695.0