[Public-List] Cockpit Drain Seacocks

[Rachel]

Oh, by the way, I used 1-1/4" seacocks.  Here was my reasoning:

Right now, the stock scupper fittings in the cockpit sole are 1-1/4",  
and they were in fine shape.  So I used 1-1/4" PTH (threaded pipe to  
barbed hose) connectors on the seacocks.

Now, if I ever changed the cockpit scupper fittings, I would likely go  
to bronze 1-1/2" size (available from Spartan and others), and then I  
could put Groco "full flow" PTH connectors on the same seacocks, and  
use 1-1/2" hose to the scupper drains.  So, good for now, and with  
good options for future.

Rachel

 1259097658.0