[Public-List] Hose Selection

mahseer at kos.net mahseer at kos.net
Thu Apr 1 05:32:13 PDT 2010


Mike
 The solution I came up with was to install a piece of hose that has the
id of the stern tube and the od the actual stern hose.  I used clear hose
with internal cord for this, it was difficult to install and has lasted
for 14 years with no problems.

John Boor
MAHSEER #380




>
> Rachel,
>
>
>
> The problem that I have seen (specifically with the A30) is that the OD of
> the stern tube is smaller than the the OD of the stuffing box (1-1/2") so
> you have 2 dimensions to deal with, in a single hose which is only a few
> inches long, I do not know the answer to this. Others on the list have
> dealt with this issue. I invite their suggestions. I remember dealing with
> this, but I think my solution was to clamp the crap out of the stern tube
> end with double clamps. It was a long time ago.
>
>
> Mike Lehman
>
>
>><((((º>`·.¸¸.·´¯`·.¸><((((º>`·.¸¸.·´¯`·.¸><((((º>
>
>
>
>
>
>
>
>
>
>> From: penokee at cheqnet.net
>> To: public-list at lists.alberg30.org
>> Date: Tue, 30 Mar 2010 22:40:25 -0400
>> Subject: Re: [Public-List] Hose Selection
>>
>> Hi John,
>>
>> I would use a high quality wet-exhaust hose. Trident is one company
>> that makes good hose.
>>
>> Buck Algonquin makes a specific stuffing box hose, but the smallest ID
>> is 1-1/2" so I was not able to use that on my A-30 (you would have to
>> have a different stern tube/stuffing box than stock, at least on #221,
>> which was a first-generation boat).
>>
>> I would use the special stuffing box hose if I could find it in the
>> correct size.
>>
>> Another thing to be aware of is that some "5-ply" hose is (if you read
>> the fine print) only 3-ply in the smaller sizes. That's not
>> necessarily a problem; I'm just mentioning it.
>>
>> The Trident hose that I did end up using still seemed very stout in
>> the short length I needed. (As I mentioned I did get the most stout
>> and suitable top-quality wet exhaust hose that they offered.) It was
>> orders of magnitude better than the one I removed!
>>
>> Mike (or anyone), have you found "real," purpose-made stuffing box
>> hose in 1-3/8"? I would like to know the source, because then I could
>> recommend it to people needing that size.
>>
>> Rachel
>> ex-#221
>>
>>
>>
>> On Mar 30, 2010, at 8:56 AM, JIRVING104 at aol.com wrote:
>>
>> >
>> > What type of hose do people recommend for connecting the shaft
>> > stuffing box? How about the cockpit drain hoses?
>> > John Irving
>> > Scotch Bonnet, #634
>>
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
> _________________________________________________________________
> The New Busy is not the old busy. Search, chat and e-mail from your inbox.
> http://www.windowslive.com/campaign/thenewbusy?ocid=PID27925::T:WLMTAGL:ON:WL:en-US:WM_HMP:032010_3
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>


 1270125133.0


More information about the Public-List mailing list