[Public-List] combing repairs

[Roger L. Kingsland]

Hi again,
 
I have cracks in my cockpit combing boards.  I have plugged all 45 holes,
sanded and refinished the original boards.  I think the cracks resulted from
my poor installation that caused some shear stress that I will fix on the
reinstall.  My question is how to repair the cracks (some about 16" long) so
they don't reappear.  I thought of adding a few butterfly joints but have
also seen metal rods placed perpendicular to the grain inside the wood.  Any
suggestions?
 
Thanks,
 
Roger 148
 
Roger Kingsland, Managing Partner
Kingsland Scott Bauer Associates

 

KSBA 
  _____  

Architects/Planners/InteriorDesigners/ProjectManagers
 
3441 Butler Street
Pittsburgh, PA 15201
N 40° 27.8344'  W79° 57.9831'
 
412-252-1500 ext.101 
412-779-5101 cell 
412-252-1510 fax
 <blocked::blocked::mailto:r.kingsland at ksba.com> r.kingsland at ksba.com
 <blocked::blocked::http://www.ksba.com/> www.ksba.com
 

 1282579809.0