[Public-List] rudder pin

[George Dinwiddie]

Woody,

On 8/4/10 12:01 PM, Bill Woodford wrote:
> I have been experiencing some “slop” in steering my A30 recently. I pulled the
> rudderpost head fitting and noticed that the “pin” that runs through  the
> rudderpost head fitting and rudder post had been sheared.  It appears to be
> made of bronze and I estimate the pin is approximately 1” long and has a
> diameter of approx 3/16”.  Does anyone know where I can obtain a replacement?

See http://alberg30.org/maintenance/Steering/RudderShoe/

  - George

-- 
  ----------------------------------------------------------------------
   When I remember bygone days                         George Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org
   So many I loved were not yet dead,           http://www.Alberg30.org
   So many I love were not yet born.                          also see:
                'The Middle' by Ogden Nash     http://idiacomputing.com
  ----------------------------------------------------------------------




 1280938390.0