[Public-List] Info on keel

[Gordon Laco]

Hi again - 

Sorry I didn't read your questions carefully.

I would recommend not hauling the boat right away. It is likely that it will
take months for whatever water has oozed in to ooze out... And until it does
you won't be able to do a good repair.

I'd keep the boat in service, and plan to do a proper grinding and epoxying
repair job in the spring.

Gord



On 23/08/10 1:01 PM, "Jeffrey" <fongemie at gmail.com> wrote:

> It would be my opinion that since you can't know for sure if more
> damage is occurring or not, I'd dive under with some underwater epoxy
> and goop the heck out of it to seal it up.  You can grind it out and
> do a proper job in the fall. I think most epoxies will work under
> water. I'd call the tech support at West Epoxy to ask them which
> product will work the best. Those guys know all sorts of tricks.
> 
> -Jeff
> 
> On Mon, Aug 23, 2010 at 12:51 PM, edward schroeder
> <eddiediver at sbcglobal.net> wrote:
>> Hey, everybody. Thanks for your prompt replies re: the Emotional Rescue keel.
>> Many of you recommended methods to repair the fiberglass; none of you,
>> however, told me the answer to my question.
>> 
>> Is the keel a certain thickness of fiberglass filled with misc. pieces of
>> metal and filled with cement grout OR is it a solid metal keel covered with a
>> certain thickness of fiberglass? When I was given management of the boat 8
>> years ago, the exposed V-berth sole was lightweight concrete encasing pieces
>> of scrap iron. I have no idea how far down that material goes.
>> 
>> The bilge is not taking on water. Would you be concerned that the fiberglass
>> is becoming saturated with fresh lake water such that we can not/should not
>> wait until Oct. 15th for a haulout and repair?
>> 
>> With approx. 1/2 inch deep gouges in the very bottom of the keel, do you
>> think that the encased metal is dangerously starting to rust and therefore
>> expand?
>> 
>> I am the volunter boat manager and my thought is to wait until Oct. 15th, but
>> I am being pressured by the club president to have the boat pulled now and
>> repaired. If I do that, we loose revenue from teaching lessons, taking out
>> under privilged urban kids, church groups, etc.
>> 
>> Ed Schroeder
>> 
>> --- On Sun, 8/22/10, George Dinwiddie <gdinwiddie at alberg30.org> wrote:
>> 
>> 
>> From: George Dinwiddie <gdinwiddie at alberg30.org>
>> Subject: Re: [Public-List] Info on keel
>> To: "Alberg 30 Public List -- open to all" <public-list at lists.alberg30.org>
>> Date: Sunday, August 22, 2010, 5:39 PM
>> 
>> 
>> Richard,
>> 
>> On 8/23/10 4:38 AM, Richard Mair wrote:
>>> Just remember if you use epoxy then you have to use cloth in the lay
>>> up..Matt. has binders which the epoxy will not break down..
>> 
>> It depends on the glass mat.  It used to be that it was held together with
>> starch, which dissolved in the polyester resin but not in the epoxy.  Now you
>> can find glass mat which doesn't use starch and works just fine with epoxy.
>> 
>> - George
>> 
>> --  ----------------------------------------------------------------------
>>   When I remember bygone days                         George Dinwiddie
>>   I think how evening follows morn;            gdinwiddie at alberg30.org
>>   So many I loved were not yet dead,           http://www.Alberg30.org
>>   So many I love were not yet born.                          also see:
>>                'The Middle' by Ogden Nash     http://idiacomputing.com
>> ----------------------------------------------------------------------
>> 
>> 
>> 
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>> 
> 
> 



 1282583460.0