[Public-List] Boat Cabin Cushions

[David Terrell]

A local shop quoted about $2400, but a local upholsterer did it for about $1400 USD. this was several years ago.

David
---- Michael <dickdurk at atlanticbb.net> wrote: 
> > The foam for the cushions can not be a square cut.  There are curved
> > edges and if the measurements are not correct and the curves
> > considered, the cushions will never fit properly.  Whoever makes the
> > cushions and covers should do the measuring.  That is the important
> > part.  Not cheap but well worth the expense.  Our beautiful boats
> > deserve it!
> > 
> > Gail
> 
> 
> 
> I just got a soldering iron that has an attachment that could be used 
> for cutting foam (from Lowes). My bucket list plan is to get foam (there 
> are endless varieties of densities and thicknesses), cut to fit, then 
> send off to have covered professionally.
> 
> Wouldn't a forepeak with Swedish/spacecraft memory foam 
> http://www.amazon.com/dp/B000A8BU92/ref=asc_df_B000A8BU921024294?smid=ATVPDKIKX0DER&tag=googlecom09c9-20&linkCode=asn&creative=380341&creativeASIN=B000A8BU92 
> be the cat's meow?
> 
> MichaelGrosh
> #220
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


 1265468283.0