[Public-List] Steam bending Teak

[mahseer at kos.net]

On 380 it was a silgle length of teak on each side.

John Boor
MAHSEER #380



>
>
> I thought that the toe rails were scarfed and mechanically fastened
> together but not glued in any way. How were they done originally? Was any
> adhesive used?
>
> Michael #133
> ----- Original Message -----
> From: mahseer at kos.net
> To: "Alberg 30 Public List -- open to all"
> <public-list at lists.alberg30.org>
> Sent: Saturday, January 30, 2010 8:39:29 AM GMT -05:00 US/Canada Eastern
> Subject: Re: [Public-List] Steam bending Teak
>
> I just replaced my toerail with mahogany that was scarfed together with
> epoxy resin. Â About a week later both scarfes gave out.
>
> John Boor
> MAHSEER #380
>
>
>
>> wound up shaping the short strips and scarfing them in instead of
>> steaming.
>>
>
>> Bob Kirk
>> Isobar #181
>>
>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>


 1264876799.0