[Public-List] Sea Water Pump Sheave

[Hugh McCormack]

Hi Jim,

 

I have just finished rebuilding the water pump on our Gray Marine.  I was able to get all necessary parts from Van Ness Engineering ( 
 http://www.vannessengineering.com/ ).  The sheave is 4 1/2" outside diameter and is 5/8" from front face to back face.  The V belt slot is 0.380 " at its widest at the circumference of the sheave.  I have a .pdf diagram of the entire pump assembly which I will send directly to you as a separate email.

 

Hope this helps.

 

Cheers,

 

Hugh

 

 

 
> From: JRogers at scelectric.ca
> To: public-list at lists.alberg30.org
> Date: Mon, 5 Jul 2010 15:17:02 -0400
> Subject: [Public-List] Sea Water Pump Sheave
> 
> Anyone know the correct size for the sea water pump sheave?
> 
> Where can I find a replacement?
> 
> The one on my Gray Marine, 1965 vintage, engine was damaged and I need to replace the sheave.
> 
> 
> 
> Jim Rogers
> 
> XANADU II # 90
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
 		 	   		  
_________________________________________________________________
MSN Dating: Find someone special. Start now.
http://go.microsoft.com/?linkid=9734384
 1278435701.0