[Public-List] Rigging
Jeffrey
fongemie at gmail.com
Wed Jul 21 08:33:18 PDT 2010
Thanks Mike,
I'll compare what I have to this chart. I'm thinking that my largest
sail is a #2.
-Jeff
On Wed, Jul 21, 2010 at 10:32 AM, Meinhold, Michael J.
<MICHAEL.J.MEINHOLD at saic.com> wrote:
> Here is a table with the Luff Perpendicular worked out for each of the
> jibs shown in the A30 Sail Plan. The Chesapeake Bay One Design rules
> specify these numbers as max dimensions for the Working Jib and the #1,
> but say only that the #2 must be smaller in every dimension than the
> #1. The J shown in the Sail Plan is 10 feet 5 inches.
>
> Luff Foot Leech LP LP/J%
> Working 30.00 10.25 25.75 8.52 0.82
> #2 32.00 15.00 30.25 14.06 1.35
> #1 34.00 19.00 33.50 18.09 1.74
>
> LP can be found directly from the three sides of a triangle as :
> LP = sqrt ( foot^2 - ( (leech^2-foot^2-luff^2)/(2*luff) )^2 )
>
> My wife greatly prefers the #2 and though she hasn't seen it in action,
> my new Working Jib will be her favorite.
>
> Mike
> Rinn Duin #272
> -----Original Message-----
> From: public-list-bounces at lists.alberg30.org
> [mailto:public-list-bounces at lists.alberg30.org] On Behalf Of Michael
> Grosh
> Sent: Tuesday, July 20, 2010 10:54 PM
> To: Alberg 30 Public List -- open to all
> Subject: Re: [Public-List] Rigging
>
> If I remember correctly, some sailmaker at a seminar had worked out the
> largest genoa ratio on the Alberg (by class rules) is 163%.
> I had a full luff, raised foot #2 (I forget the parameter I used for J,
> but fairly big, as I also have a working jib) made for use as a primary
> cruising sail, and it works great for that. The wife tends to go into
> conniptions, just on principle, I think, whenever she sees the #1 come
> out.
>
> MichaelGrosh
> #220
>
> On Jul 20, 2010 1:35 PM, <jirving104 at aol.com> wrote:
>
>
> When I bought my Alberg 30, it had a small self tending jib only. I
> assume it has always been that way. I now sail with loose footed jibs,
> 80%, 140% and 170%. I didn't change the rig any. I'm curious if A-30's
> with the small self tending jibs had smaller stays.
> John Irving
>
> Scotch Bonnet, #634
>
>
>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
--
Jeffrey Fongemie
1279726398.0
More information about the Public-List
mailing list