[Public-List] Leading lines aft (gregr at nethere.com)

[Laughing Gull]

Schaeffer makes a cheek block and you can buy the separate Delrin spacer to get it to match the curve of the mast. Most of the hardware folks make a similar block

I used 10-24 bolts drilled and tapped into the mast. I have little experience with rivets, I would certainly no use aluminium ones. With the headsails there is a fair bit of strain on those blocks.

Jonathan Adams
Mobile: 443-538-7443
Composed on PDA

On Mar 17, 2010, at 10:14 PM, gregr at nethere.com wrote:

Jonathon,

Thanks for the picts! How did you mount the check blocks to the mast? We use
aluminum pop rivets on a lot of the hardware for the Victory 21s I race. I
don't think I would trust them on my Alberg. (I don't really trust them on
the Victory's...)

Greg
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


 1269015215.0