[Public-List] Fitting a dodger on an Alberg 30

[Mike Lehman]

Hey Peter,

 

Our first dodger had the on the top edge of the coaming (terrible). Our second (and every dodger since) has had the pins on the sides of the main cabin - very good location (the best). It makes the dodger very rigid and with the grab bars installed on the dodger frame, you can actually use it as a hand hold when going forward.

 
Mike Lehman 

 
><((((º>`·.¸¸.·´¯`·.¸><((((º>`·.¸¸.·´¯`·.¸><((((º>
 
 






 
> From: milleype at kingston.net
> To: public-list at lists.alberg30.org
> Date: Wed, 5 May 2010 09:28:17 -0400
> Subject: [Public-List] Fitting a dodger on an Alberg 30
> 
> Hi all,
> 
> Any suggestions as to where to attach the side mounted hinge pins for a two
> bow dodger frame on an Alberg 30; sides of the coach roof vs. the sides of
> the wooden combings?
> 
> Peter M.
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
 		 	   		  
_________________________________________________________________
Hotmail has tools for the New Busy. Search, chat and e-mail from your inbox.
http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_1
 1273067189.0