[Public-List] Play in Tiller

[Gordon Laco]

Edson Marine in Massachusetts have the patterns and may even have items in
stock.

 www.edsonmarine.com

I have heard of repairs being made by having a machine shop build up the
bearing surfaces with brazing...then grinding and filing down again to get a
good tight slip fit.

Gord Laco #426 SURPRISE







On 01/11/10 9:07 AM, "jirving104 at aol.com" <jirving104 at aol.com> wrote:

> 
> Are there any miracle cures for play in the tiller/rudder post connection?
> Are these fittings still made?  I drilled out the holes and put in a larger
> bolt but it didn't last.
> John Irving
> Scotch Bonnet, #634
> 
> 
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org



 1288617066.0