[Public-List] Painting the mast and boom

Mike Lehman sail_505 at hotmail.com
Fri Sep 3 06:19:50 PDT 2010


Hi Joseph
 
I just knew you were going ask me that...hum...let's see that was 25 years ago...it was some kind of aluminum putty. It has held up well and I think you could use it wit bare aluminum. I seem to recall that I got it at an auto supply store.

 
Mike Lehman 

 
><((((º>`·.¸¸.·´¯`·.¸><((((º>`·.¸¸.·´¯`·.¸><((((º>
 
 






 
> Date: Fri, 3 Sep 2010 13:08:03 +0000
> From: crufone at comcast.net
> To: public-list at lists.alberg30.org
> Subject: Re: [Public-List] Painting the mast and boom
> 
> 
> 
> Hi Mike, 
> 
> What did you use to fill the unwanted holes in your mast prior to painting?  Did this product hold up under the paint? Do you think that this product could be use on an unpainted mast and still look presentable? Thanks. 
> 
> P.S. BTW for some time I thought that you were also a 505 dinghy sailor until I realized that 505 was your Alberg hull number! 
> 
> Michael 
> ----- Original Message ----- 
> From: "Mike Lehman" <sail_505 at hotmail.com> 
> To: "Alberg 30 Public List -- open to all" <public-list at lists.alberg30.org> 
> Sent: Friday, September 3, 2010 8:19:39 AM 
> Subject: Re: [Public-List] Painting the mast and boom 
> 
> 
> Joseph, 
>   
> I painted my mast and boom with Awlgrip about 25 years ago and it is still doing good. It was a long and tedious job with multiple steps. First lots of sanding (my boat #505 the mast and boom were anodized...not sure that was true for #115); Then there was a chemical wash; then there was an etching process; then there was a primer; and at last there was the final coat. The paint is finiky, and needed to be adjusted for temperature and humidity (that may have changed in the past 25 years). I started with a china bristle brush from the top of the mast and worked my way down...I figured that as I got closer to the base (and eye-level) my brushing technique would improve and I woul have fewer brush strokes. I did the boom after doing the mast. It was a good time to remove and re-bed all of the mast/boom hardware and fill holes that were no longer used. I painted mine a light gray to keep it cool in the summer months (cannot even imagine having a black mast on the Chesapeake). 
>   
> Hope this helps. 
> 
>   
> Mike Lehman 
> 
>   
> ><((((º>`·.¸¸.·´¯`·.¸><((((º>`·.¸¸.·´¯`·.¸><((((º> 
>   
>   
> 
> 
> 
> 
> 
> 
>   
> > Date: Fri, 3 Sep 2010 07:24:17 -0400 
> > From: joebinc at gmail.com 
> > To: Public-List at lists.alberg30.org 
> > Subject: [Public-List] Painting the mast and boom 
> > 
> > Hull #115 needs a paint job on the rig. Are the mast and boom made of 
> > anodizes or non-anodized aluminum? Has anyone used brushable Awlgrip paint 
> > for this job? 
> > _______________________________________________ 
> > These businesses support your Association: 
> > http://www.alberg30.org/store/A30supporters.html 
> > Please support them. 
> > _______________________________________________ 
> > Public-List mailing list 
> > Public-List at lists.alberg30.org 
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
>                                                 
> _______________________________________________ 
> These businesses support your Association: 
> http://www.alberg30.org/store/A30supporters.html 
> Please support them. 
> _______________________________________________ 
> Public-List mailing list 
> Public-List at lists.alberg30.org 
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
 		 	   		  
 1283519990.0


More information about the Public-List mailing list